Double Glazing Door Lock Repairs
Has your uPVC window or door mechanism deteriorated? Perhaps the door or window handles don't meet up correctly or are difficult to use.
It's important that the double glazed doors operate smoothly, otherwise you will lose energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock for an affordable cost.
Snapped Key
It can be quite frustrating when a key is snapped inside a lock. This can also be a security issue, as it may expose you to a burglar if the door is not locked. Fortunately, there are some quick fixes you can attempt to fix the problem and get your door functioning properly once more.
Be sure to remain calm. If you panic, you could end up pushing the damaged key piece further into the lock.
Spray WD-40, or any other penetrating lubricant into the lock. This will assist the broken piece to come out more easily. You can also make use of a screwdriver to break pieces that might be blocking the way. If you happen to have a small piece of the key left sticking out it, you can make use of a paperclip or other thin metal object to grab it and pull it out. Both of these methods work well, however, be cautious not to push the damaged piece of the key deeper into the keyway.
Some paperclips have grooved edges that can serve as hook extractors, and some Jigsaw blades can also be used for this function. If you don't happen to have any of these items, you can bend a hook using needle-nosed pliers. Additionally, a pair of tweezers is a good way to grip and pull out the last bit of the broken key.
If you're unable to pull the broken piece of key out, you can try using a lock de-icer. It's usually available at all hardware stores. It works by freezing any moisture or ice that may be in the lock.
If none of these tricks appear to be working you, it's the time to contact locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair through us online, or give us a phone call to discuss your needs.
Broken Cylinder
A broken cylinder can pose a serious security risk. A locksmith professional can repair the cylinder. To fix the cylinder locksmiths will need to tap it. They can do this using the hammer or any other tools, but the most effective way is to employ a long match or piece of wire. The match or wire end near the keyway. The locksmith can hit the lock to break it open. This is much better than using a hammer, which could cause damage to the lock.
Overheating is the most common reason for cylinder heads to crack. This can happen when the cylinder block as well as the cylinder head are made from different metals, such as cast iron and aluminium. When different metals heat up and cool down at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, thus leading to cracks.
Corrosion is a different cause of fractures in cylinders. If the cylinder head and the block of the cylinder are not properly maintained, this can lead to rusting or corrosion that could cause them to expand at a greater rates than they ought to. In time, this could also cause cracks.
If your uPVC window or door lock is stiff or requires lots of pressure to turn, this can be caused by many things. This issue could be caused by a malfunctioning locking mechanism or misalignment as well as a worn-out handle.
Fortunately it's a simple and cost-effective fix for the majority of double glazing owners. A professional locksmith should be able to solve the issue within an hour after arriving at your residence. Depending on the needs of your home they can change the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that give you an extra security layer from burglars. This is a small cost to pay for the peace of mind that comes from knowing your uPVC doors are secure.
Broken Handle
Window handle locks have complex mechanisms that wear out with time and use, so it's not a surprise they occasionally break. It isn't always easy to pinpoint the reason behind the problem and repair it correctly.
If the issue is with the internal locking mechanism or the latch, repairing your broken handle can improve your uPVC double glazing door's security and help you to stop draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and the lock of your door.
Screwdriver: With the window open remove the screw that holds the handle. The screw should be on the inside of the backplate, which is usually hidden by a screw cap for aesthetic purposes. You should not lose any internal components of the handle such as the levers and plates on either side. Keep them in the same arrangement to make it simpler to replace them in the event of a need.
Then, using a second screwdriver loosen the screw that connects the handle to the spindle on the back. Once the screw is loose, you should be capable of pulling the handle off and pull out the broken spindle. Replace this with a new one, ensuring it's the same length as the old one (you can typically find these on the internet or at hardware stores) and then securely screw it into the right place. Be careful not to tighten too much because this could cause damage to the handle or the window frame.
Close the handle and test it. It is likely that it will operate smoothly and you'll be able to unlock your window.
Don't forget to double-check that your uPVC window is closing properly when you're using the handle. If they don't close properly, you could experience damp or draughts inside your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they can shut properly.
Broken Spindle
It is more likely for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate an electronic locking mechanism within the frame of the window. The handle is attached to a centre rod that is then activated by a series of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned, it is possible that the spindle has broken, this can be a very frustrating issue.
There are ways to fix this problem. A good locksmith can quickly and efficiently solve the issue. A reputable locksmith can disassemble the handle of the window by using a tool to remove the wheel portion in which the spindle is. This can be done without damaging the handle or causing any other damage to the window frame.
After the wheel has been removed, the technician will inspect the spindle to determine what has caused it to break. double glazing repair near me involves disassembling the spindle, and then examining each component, noting any wear or damage. This procedure is typically performed by technicians in an environment that is clean.
The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that might be obstructing its normal functioning. The spindle may then be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is similar in size to the original. The technician will then drill holes that are identical to both pieces. This ensures that the new spindle has an exact fit with the handle.
If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centers offer generic replacements but If the style of your window is unusual then you will need to speak with a woodworker or cabinet maker who can replicate the exact model for you. After the spindle is installed, it can be attached to the handle. The screw holes on the handle with the screws that are already in the frame. Once the new handle is seated you will be ready to operate your uPVC window.